::: Pressure Reducing Valve [DP 13] :::

Pressure Reducing Valve [DP 13]

 
 Description:
 DP 13 is a Cast Iron pilot operated pressure
 reducing valve suitable for steam or compressed air.
 Note: For steam : IBR / NIBR, For Air: NIBR
 
 Available Sizes & Pipe Connections:
 15, 20, 25, 40 & 50 NB
 Screwed : BSPT / NPT for 15,20 & 25 NB
 Flanged : BS 10 Table 'F/H' for 40 & 50 NB

 Limiting Conditions :
 PMO - Maximum allowable Pressure : 13.00 kg / cm2
 TMO- Maximum allowable Temperature : 220⁰C
 Cold hydraulic test pressure : 26.00 kg / cm2

 Springs as per requirement
 Yellow: 0.2 Bar to 3.0 Bar
 Blue : 2.5 Bar to 7.0 Bar
 Red : 6.0 Bar to 13.0 Bar
 Std. Acc.: Pr. Gauge, Syphon & Gauge Cock
 
 Pressure Sensing Pipe:
 The DP 13 controls the pressure by sensing the
 downstream pressure through a pressure sensing
 pipe taken to the union (item 27) or through the
 internal sensing pipe (item 19) Fitting of the external
 pressure sensing pipe is described in the User Manual
 supplied with the valve.
 Note : Capacity is reduced and there is a possibility
 of hunting if an external pressure sensing pipe is not
 fitted
 
 Installation :
 The valve should be installed in a horizontal pipeline
 with direction of flow as indicated by the arrow on
 the valve body. Full instructions are given in the
 User Manual supplied with the Valve.

 Dimensions : (approx.) mm (Refer Flg. 1 & 2)